Safety Submission

In: Business and Management

Submitted By gregsaltriver
Words 3195
Pages 13
6.0 Se Factor 6 - Safety Program
XXXXX Safety Program is described in this section as required by the RFP. Copies of any documents not included with this proposal as an Attachment, Appendix or Exhibit will be provided immediately upon request.

6.1 Required Safety Forms and Data and Experience Modification Rate (EMR):
XXXXX’ and its significant subcontractors’ Safety Forms and Data are included in this section as required by the RFP.

6.1.1 XXXXX Experience Modification Rate (EMR)

(Insert Form Here)

6.1.2 OSHA Form 300A Summary of Work-Related Injuries and Illnesses Reports

(Insert Form Here)

6.1.3 OSHA Total Recordable Cases Incidence Rate (TCIR)

(Insert Form Here)

6.1.4 Days Away from Work, Job Transfer, or Restriction (DART) Rate

(Insert Form Here)

6.1.5 Data and Trends Narrative (Need whatever explanation SME’s are going to use to explain away our “High Risk” to “Extremely High Risk” rating in these categories)

6.2 Significant Subcontractors’ Experience Modification Rate (EMR)

(Insert Form Here)

6.2.1 Significant Subcontractors’ OSHA Form 300A

(Insert Form Here)

6.2.3 Significant Subcontractors’ OSHA (TCIR) Rate

(Insert Form Here)

6.2.4 Significant Subcontractors’ (DART) Rate

(Insert Form Here)

6.2.5 Significant Subcontractors’ Data and Trends Narrative

(Insert Form Here)

6.3 Safety Program and Procedures
XXXXX approach to Safety on all worksites includes adherence to contract-specific safety requirements. For Kings Bay, this includes but is not limited to the following documents:

* OPNAVINST 5100.23 NAVOSH Program Manual * Public Law 91-596, Occupational Safety and Health Act of 1970 * OPNAVINST 5100.12 Navy Traffic Safety Program * 29 CFR 1910 Labor, Occupational Safety & Health ( General Industry) * Army Corps of Engineers, EM 385-1-1 General Safety Requirements…...

Similar Documents

Safety

...problems, including acid deposition, hazardous air pollution, and visibility impairment, through programs written by Congress to address the particular issues associated with each type of pollution. II. Clean Air Act Regulatory Programs A. Air-Quality Regulation 1. The centerpiece of the Clean Air Act is the national ambient air quality standards (NAAQS) program, which addresses pervasive pollution that endangers public health and welfare. 2. NAAQS have been established for six pollutants: a. Sulfur dioxide b. Nitrogen dioxide c. Particulate matter d. Carbon monoxide e. Ozone f. Lead 3. For each of these pollutants, NAAQS are set at levels designed to protect public health with an adequate margin of safety (referred to as the primary NAAQS) and to protect public welfare against known or anticipated adverse effects (the secondary NAAQS) a. Areas that do not meet one or more of the knacks are known as nonattainment areas and must comply with a number of special requirements to bring them into attainment. b. NAAQS are to be reviewed and revised as appropriate at least every five years. 4. State implementation plans a. The Clean Air Act gives each state primary responsibility for ensuring that emissions from sources within its borders are maintained at a level consistent with the NAAQS. b. This is achieved through the establishment of source specific emission limits and other requirements in SIPs addressing the primary......

Words: 8907 - Pages: 36

Safety

...and maintain the required distance. 6. Warning devices: Electronic warning devices installed on cranes or other equipment can be used to alert the operator if the boom is coming too close to an energized line. Prevention ideas taken in part from Janicak CA (1997), "Occupational Fatalities Caused by Contact With Overhead Power Lines in the Construction Industry," JOEM, 39(4), pp. 329-332. Getting Help WISHA Consultation Program Washington State Department of Labor and Industries http://www.LNI.wa.gov/Safety/KeepSafe/Assistance/Consultation Everett (Region 1, Northwest Washington): 425-290-1300 Seattle (Region 2, King County): 206-515-2800 Tacoma (Region 3, Pierce, Kitsap, Clallam, and Jefferson Counties): 253-596-3800 Olympia (Region 4, Southwest Washington): 360-902-5799 East Wenatchee (Region 5, Central and Southeastern Washington): 509-886-6500 Spokane (Region 6, Eastern Washington): 509-324-2600 WISHA Policy & Technical Services Tumwater Central Office – Safety/High Voltage: 360-902-5562 Other Resources • • • • • • • NIOSH ALERT: Preventing Electrocutions of Crane Operators and Crew Members Working Near Overhead Power Lines, DHHS (NIOSH) Publication No. 95-108 www.cdc.gov/niosh/crane.html. NIOSH ALERT: Preventing Falls and Electrocutions During Tree Trimming, DHHS (NIOSH) Publication No. 92-106 www.cdc.gov/niosh/92-106.html. NIOSH ALERT: Preventing Electrocutions During Work with Scaffolds Near Overhead Power Lines, DHHS (NIOSH) Publication No. 91-110......

Words: 1394 - Pages: 6

Safety

...Safety Slogans Here are some safety slogans that will help you to make safety a way of life. [pic] Safety is a very important aspect of life, be it at home, out on the road, or at the workplace. Here is a collection of some great safety slogans that you can use on posters to stick up in your office or in your home, or use in presentations, or send as emails. Safety isn't just a slogan, it's a way of life. Better to be safe than to be sorry! Chance takers are accident makers. Be alert! Accidents hurt. A safer you is a safer me. Unprepared = Unsafe. Anyone driving slower than you is an idiot, and anyone going faster than you is a maniac. The best car safety device is a rear-view mirror with a cop in it. Remember - Safety is not a job; it is a way of life. Safety is a cheap and effective insurance policy While on a ladder, never step back to admire your work Safety doesn't slow the job down but mishaps do. A spill, a slip, a hospital trip. Your safety is everyone's responsibility, especially yours. You can't get home, unless you're safe. Ignoring a warning can cause much mourning. The adage "look before you leap" is a lifesaver. The safe way is the right way When jogging, run against the traffic flow. Wear the right protective equipment for the job. Use the right tool for the job. Just because you always did it that way, doesn't make it right. Safety is something you learn from the start - Being accident......

Words: 2954 - Pages: 12

Submission Standard

...Assignment Submission Standards Version 1.6 – 11 October 2011 Submission standards • Here are some simple rules for submission of assignments. • It’s not to make things scary and difficult; just to make things go smoothly. • Ask your lecturer for help if you don’t understand something. RMIT University©11/10/2011 RMIT International University Vietnam 2 Assignment submission • Assignments are typically submitted to Blackboard. • If Blackboard is down, there is still no excuse not to submit! Submit by email instead. • The below courses (and possibly others) require some or all assignments to be submitted to Turnitin: –Intro to IT, SEF, PCP, Security • Information about Turnitin is available on the Intranet: http://online.rmit.edu.vn/student/resources/turnitin RMIT University©11/10/2011 RMIT International University Vietnam 3 Assignment submission • The filename of the submitted file must follow this convention: group#_teacherName_student#_studentName_assign# • If one file is to be submitted, the file can be uploaded directly, example: G1_Joe_s3037354_NguyenThanhKim_A1.doc • If the submission consists of multiple files, the files must be zipped and the zip file must be uploaded, example: G1_Joe_s3037354_NguyenThanhKim_A1.zip RMIT University©11/10/2011 RMIT International University Vietnam 4 Assignment submission • Blackboard corrupts RAR files. Your lecturer can’t open them. Use ZIP. • You can only submit an......

Words: 829 - Pages: 4

Safety

... including tools and equipment which may be furnished by employees. All hazards involved in the use of power tools can be prevented by following five basic safety rules: • Keep all tools in good condition with regular maintenance. • Use the right tool for the job. • Examine each tool for damage before use. • Operate according to the manufacturer's instructions. • Provide and use the proper protective equipment. Note the following key points in this lesson: • Hazardous moving parts of a power tool need to be safeguarded. • All employers should caution employees that saw blades, knives, or other tools be directed away from aisle areas and other employees working in close proximity. • To protect the user from shock, tools must either have a three-wire cord with ground and be grounded, be double insulated or be powered by a lowvoltage isolation transformer. • Portable electric powered tools must meet the OSHA electrical requirements. • All jacks - lever and ratchet jacks, screw jacks and hydraulic jacks - must have a device that stops them from jacking up too high. Remember: Employees should be trained in the use of all tools - not just power tools. They should understand the potential hazards as well as the safety precautions to prevent those hazards from occurring. Appropriate personal  protective equipment, e.g.,  safety goggles, gloves, etc.,  should be worn due to hazards  that may be encountered while  using portable power tools and  hand tools.   ...

Words: 259 - Pages: 2

Assignment Submission

...Schultz (2006). Rituals in organizations: A review and expansion of current theory. Group Organization Management. (34), 1140139. Schein P.R. (1992). Online sales promotion for management. Journal of service organisational .VOL 20. No 7 Charles, H. (1976). The Organizational Culture Inventory. Plymouth, MI: Human Synergistic, Inc. Katter, J. P. (1992). Corporate Culture and Performance. New York: The Free Press. Montana, P., and Charnov, B. (2008) Management (4th ed.), Barons Educational Series, Hauppauge: NY Adkins, B. and Caldwell, D. (2004). "Firm or subgroup culture: Where does fitting in matter most?" Journal of Organizational Behaviour, 25(8) pp. 969–978 Burman, R. and Evans, A.J. (2008) "Target Zero: A Culture of safety", Defence Aviation Safety Centre Journal, pp. 22–27. Cameron, Kim S. & Quinn, Robert E. (1999), Diagnosing and Changing Organizational Culture: Based on the Competing Values Framework, Prentice Hall, ISBN 978-0-201-33871-3, reprinted John Wiley & Sons, 2011 Chatman, J. A., & Jehn, K. A. (1994). "Assessing the relationship between industry characteristics and organizational culture: How different can you be?". Academy of Management Journal, 37(3), 522-553. Cummings, Thomas G. & Worley, Christopher G. (2004), Organization Development and Change, 8th Ed., South-Western College Pub. Denison, Daniel R., Haaland, S. and Goelzer, P. (2004) "Corporate Culture and Organizational Handy, Charles B. (1976) Understanding Organizations, Oxford......

Words: 7281 - Pages: 30

Safety

...asbestos from the bottom of the pond fall within the definition of “Class II asbestos work”. A serious violation, one involving a substantial probability of physical harm and death requires a mandatory penalty of up to $1,000. A willful violation runs a considerably greater risk of penalty. In my opinion the damages happened because of company violations against the safety rules and the OSHA recommendations. “A four-day hearing was held before a Commission administrative law judge (“ALJ”).   In his decision and order, the ALJ vacated four violations, affirmed four violations as other-than-serious, affirmed three violations as de minimis, and assessed penalties totaling $1,800.00. The decision of the ALJ became the final order of the Commission.   Exercising jurisdiction pursuant to 29 U.S.C. § 660(a), this court denies Tierdael's petition for review, concluding that the plain and natural meaning of the regulation encompasses Tierdael's activity.” So depending on what stated above, the Tierdoel Construction Co. should pay for the damages caused by the asbestos pipe system because of their negligence of the safety requirements....

Words: 646 - Pages: 3

Submission

...|[pic] |Cover sheet for submission of | | |work for assessment | |School: |Singapore Institutes of Management | |Program name | |Program code | |Office use only | | | | | |School date stamp | |Course/unit name | |Course/unit code | | | |TAFE National Module Unit of | |TAFE National Module Unit of | | | |Competency (UOC) name | |Competency (UOC) ID | | | |Assignment no. | |Due date | |Name of lecturer/teacher | | |Campus | |Class day/ time | |Tutor/maker’s name | ...

Words: 390 - Pages: 2

Submission to Local Network Cib

...ASSESMENT 2 – Report By Brenda Widjaja Lala Director, Corporate Communications South Africa HSBC Mandela Rhodes Place Cnr Wale Burg Street Cape Town South Africa April 23, 2012 Mrs. Grace Executive of the Local Network 3rd Floor, MPF House 32 Princess of Wales Terrace Sunnyside Office Park Park town Dear Mrs. Anne Marie Gutierrez, Executive of the Local Network Submission to Johannesburg the Local Network of South Africa This proposal is presented to the local network of South Africa in order to against human rights and environment cases. According to the United Global Compact, HSBC strives to encourage the changes of human rights and environmental cases to the better side. HSBC is supporting to the first of ten principles which is “Business should support and respect the protection of internationally proclaimed human rights” and also the eighth principles which says that “Business should undertake initiative to promote greater environmental responsibility” (Ten Principles 2012). In 2007, HSBC has encouraged the changes in the environmental cases by cooperating with First Direct, they plant for more than 20.000 trees in each country (First direct 2010). They also encourage their customers to switch to use online banking. More than one million of HSBC and First Direct customers switch to use online banking. On the other hand, there is a risk of doing this system. More than 3.1 million customers are left from the HSBC members (Espiner 2006).......

Words: 1350 - Pages: 6

Safety

...Running Head: ARTICLE REVIEW Article Review: Safety, Accidents, and Investigations: Be Prepared for the Unexpected Article Summary In this article, the author has explained the importance of health and safety programs in the companies. Through this article, people can be able to identify the potential job hazards in the organizations and development plan for its safety. Apart from this, he has also explained the methods of effectively responding to the accidents. With the help of this, different strategies for conducting the investigation of the company is also identified by the author. Answer 1: Author’s Main Point In this, the author is mainly focused towards the importance of health and safety programs in companies. He has also explained the accident development plan, which is useful in reducing the job hazards and strategically handle the external accidents investigations (Battles, 2011). Apart from this, the author’s main point is to generate the awareness among different countries and reveals the disadvantages of not having health and safety plan such as increases in health care cost, penalties, lost productivity and fines. Answer 2: Author’s Intended Audience In this paper, the author’s intended audience is organizations in different companies. It is because organizations cover a large number of people and health and safety program also improves the personal life of the employees. At the same time, the author has also generated awareness......

Words: 1268 - Pages: 6

Safety

...currently employed full-time safety professional. The questions you should ask follow. You do not have to stick directly to the questions as your conversation may stray into other important communications type subjects. Your deliverable will be a two-page report plus cover page with an introductory paragraph about who you interviewed. Next will be the Q &A portion, followed by Conclusions. The Conclusions section is where you will identify things you learned from the conversation and the most helpful hints or surprises you learned from the discussion. This should be double spaced, size 10-12 font, printed, and brought to class on the due date. Potential Interview Questions These are Potential questions. You may write your own but they must meet the objectives of the activity above. General Communication Questions 1. With whom do you communicate most frequently about SHE? (For example: fellow safety pros, equal managers, superiors, owners, employees, contractor representatives?) I interact daily with internal employees of the company by overseeing their safety practices. I also communicate approximately 20% of the work day with outside contracts that are performing work on the premises. They may be overseen to make sure that they are in compliance with all of our internal safety practices and codes. 2. How much of your time is spent creating or presenting training programs? Approximately 5%. We have an internal company safety team that meets for one......

Words: 925 - Pages: 4

Safety

...industry, Safety is one of the most critical factor. Research Objectives Literature Review At a time when many companies are emphasizing on improving their business processes, operational efficiency and enhancing pro people focus, safety is one of the most important areas of improvement. It becomes even more critical in a labor intensive industries like manufacturing and construction. Most of the industries have adopted a well set standard operating procedures and efforts are on to get it better day by day. The focus of our study has been to identify the factors which affects the safety awareness, minimizes accidents at workplace and as a result meets operational efficiency of the organization. When the effect of these factors are positive, we may conclude that the organization is people oriented. Previous Studies: One of the earlier studies in this area was conducted by Cox & Cox in the year 1991 for European industrial gas sector. It had considered five factors affecting the safety parameters – effectiveness of arrangements for safety, individual responsibility, individual skepticism, safeness of work environment and personal immunity. This study was done not keeping in mind any specific industry and later on further studies revealed that model and frameworks for employee attitudes to safety may be dependent on the context and hence a generic study for overall industry may not be appropriate. Subsequent study by Cox, Sue & Tomas in the year 1997 on......

Words: 800 - Pages: 4

Journal Submission

...Felicia Marshall PSYC4110 Journal Submission 2 Capella University August, 2015 Description – Section 4 #1 (Compassionate Love Scale) I feel the assessment gave me adequate and accurate information on my tendency to compassionate. It asked me very personal questions to make me look deep within myself to ask myself if I really feel a certain kind of way about people. I did not find anything surprising with the assessment. It actually affirmed what I thought I felt about people. I wasn’t looking for any magical answer or scoring that’s too out of the way. It was meaningful to me in the sense that I was able to continue to be honest about my answers, and in the end I was able to come up with the result that I expected. This activity was not uncomfortable for me to complete, because I love assessments that truly ask the deep questions to challenge me. I respect the answers, because they are very true, and if there is something I need to change, then I can do so. I learned that my reality is real. I used to have a different feeling about compassion and mankind when I was younger, because in my eyes man could not do any wrong. I honestly feel differently towards strangers today, as the world is not what it was when I was a child. I find that I still have compassion there, however it has been altered over the past decade of my life. I can take my results and evaluate how I treat people with compassion. I am usually able to......

Words: 1029 - Pages: 5

Safety

...Patient Safety in Healthcare Joyce Kimeu Chamberlain College of Nursing NR101: Transition in Nursing June 04, 2015 Patient Safety in Healthcare Many errors can be avoided by having safety measures in place. Sign up to Safety campaign reveals that a million people use the services of the National Health Services (NHS) every 36 hours, with the majority being given care that is both safe and of high quality (NHS England, 2014). However, sometimes mistakes occur and patients are harmed as a result. Sign up to safe campaign shows that between 2011 and 2012, a total of 326 ’never events’ were reported to strategic health authorities (Glasper, 2014).This number can be reduced by addressing different safety measures, such as building a safety culture, leading and supporting staff, promote reporting, learning and sharing safety lessons and implementing solution to prevent harm (Glasper, 2014). Building Safety Culture An important component of a successful strategy to address these kinds of safety problems is the encouragement of personnel to be more forthcoming in reporting and disclosing errors, actual harm, and fear of being bullied. This instance will apply to all staff members, and everyone involved in caring for patient will know that their voices will be heard. For instance, where the leadership is concerned by being proactive, gaining input from the staffs about the improvements needed and addressing them with efficiency and urgency. Leading and Supporting......

Words: 576 - Pages: 3

Mcs Submission Guidelines

...June 9-13, 2012 – Baltimore, Maryland 2012 ASHP Summer Meeting Management Case Study Submission and Format Guidelines Management Case Studies are 20-minute platform presentations followed by a 10-minute question and answer period. ASHP is seeking management case studies in specific topic areas: • Informatics • Leadership / Administration • Medication Safety • Clinical Conundrums This document will assist you in the preparation of your submission for a Management Case Study (MCS). The number of accepted management case studies will be limited and it is anticipated to be a highly competitive process. Each primary author is allowed only one submission. Due to ACPE Standards regarding active learning, a standard format will be required for final slide presentations which will utilize the learning objectives and self-assessment questions that you prepare for your submission. Thank you for your interest in presenting at the 2012 ASHP Summer Meeting! For assistance with preparing learning objectives and self-assessment questions, visit: http://www.ashp.org/menu/Education/OnlinePrograms.aspx and select ‘Education’ from the drop-down menu What is a Management Case Study? Introduction • The case study method was pioneered by the Harvard Business School in the early 1900s and still stands as a popular and effective teaching strategy in business education. • • The case method relies on information about people and events in a true-to-life situation that represents a problem to be......

Words: 1988 - Pages: 8