Production Process of Rbl

In: Business and Management

Submitted By faisalmunim
Words 1203
Pages 5
Product description:
Now a day, automotive battery is also used for IPS, UPS service. The batteries that Rahimafrooz produces are suitable for both automotive and home appliances use. An automotive battery is a type of rechargeable battery that supplies electric energy to an automobile. It is used power the starter motor, the lights, and the ignition system of a vehicle’s engine. An automotive battery may also be a traction battery used for the main power source of a vehicle. Now a day, automotive battery is also used for IPS, UPS service. The batteries that Rahimafrooz produces are suitable for both automotive and home appliances use.
Automotive SLI batteries are usually lead-acid batteries, and are made of six galvanic cells in series to provide a 12 volt system. Each cell provides 2.1 volts for a total of 12.6 volt at full charge. Heavy vehicles such as highway trucks or tractors, often equipped with Diesel engines, may have two batteries in series for a 24 volt system, or may have parallel strings of batteries.
Lead-acid batteries are made up of plates of lead and separate plates of lead dioxide, which are submerged into an electrolyte solution of about 35% sulfuric acid and 65% water. This causes a chemical reaction that releases electrons, allowing them to flow through conductors to produce electricity. As the battery discharges, the acid of the electrolyte reacts with the materials of the plates, changing their surface to lead sulfate. When the battery is recharged, the chemical reaction is reversed: the lead sulfate reforms into lead oxide and lead. With the plates restored to their original condition, the process may now be repeated.
Lead-acid batteries for automotive use are made with slightly different construction techniques, depending on the application of the battery. The "flooded cell" type, indicating liquid electrolyte, is typically inexpensive…...

Similar Documents

Production

... people and chemicals are required to process the chips. Potato Chip Manufacturing Process (information retrieved and paraphrased/summarized from) http://www.madehow.com/Volume-3 Potato-Chip.html When the potatoes arrive at the plant, they are examined and tasted for quality. The potatoes move along a conveyer belt to the various stages of manufacturing. The potatoes are then peeled and washed in cold water and passed through a revolving impaler/presser that cuts them into paper-thin slices, between 0.066-0.072 in (1.7-1.85 mm) in thickness. If the potatoes need to be chemically treated to enhance their color, it is done at this stage. The paper-thin potato slices pass under air jets that remove excess water as they flow into 40-75 ft (12.2-23 m) troughs filled with oil. The oil temperature is kept at 350-375°F (176.6-190.5°C). After frying the chips are deposited into a trough where salt is sprinkled from receptacles positioned above the trough. Potato chips that are to be flavored pass through a drum filled with the desired powdered seasonings. The chips are then conveyed to a packaging machine with a scale where it releases a predetermined/measured amount of chips into bags without breakage or letting too much air into the bags before they are sealed. The sealed bags are then conveyed to a collator and hand-packed into cartons. For quality control taste samples are made from each batch throughout the manufacturing process. Competitive Landscape Demand is......

Words: 1984 - Pages: 8

The Process of Beer Production

...Introduction Brewing beer is really a very simple process, a unique mix of art and science that consists of a number of key steps. Brewing begins with malted barley that is milled and mixed with hot water to form a mash. During mashing, the malt starches are converted to sugars. The sugar rich water is then strained through the bottom of the mash and is now called wort. The wort then goes to the brew kettle where it is brought to a boil. During this stage, hops are added at different times during the boil for either bitterness or aroma. The wort is then cooled and aerated, and brewers' yeast is added for fermentation. The yeast produces alcohol and carbon dioxide and other byproducts from the sweet wort. After fermentation the "green beer" undergoes maturation. The last step in the brewing process is filtration, and then carbonation. Next the beer is moved to a holding tank where it stays until it is bottled or kegged. For a more detailed description of the brewing process click "Continue." Barley Malt Barley malt is to beer as grapes are to wine. It is ideally suited to brewing for many reasons. Malted barley has a high complement of enzymes for converting its starch supply into simple sugars and contains protein, which is needed for yeast nutrition. Of course, one important element is its flavor. There are two types of barley: six-row and two-row. [pic] Pale Ale Malt Barley Malt Six-row Barley Malt Generally, six-row barley has a higher enzyme......

Words: 33569 - Pages: 135

The Production and Marketing Process of Indomie

...They're new. They're state of the art. They're Mary Kay® Fulland Medium-Coverage Foundations – the perfect way to give skin a more radiant appearance. Your customers will love the flawless finish they receive with these advanced formulas. Specially designed to help even skin tone, the new foundations contain bright pigments for a more luminous, natural look. And to provide the coverage your customers desire, we're offering medium- and fullcoverage formulas, all with long-wearing, stay-true color that won't rub off. And there's more! Mary Kay® Full- and Medium-Coverage Foundations offer 20 incredible, nutrient-rich shades to help keep skin looking beautiful. These oil-free formulas deliver a natural radiance that lasts all day. Now that's a foundation you can build on! Mary Kay Foundation Shade Conversion Chart! New Full & Medium Coverage Foundations Ivory 100 Ivory 104 Ivory 105 Ivory 200 Ivory 202 Ivory 204 Beige 300 Beige 302 Beige 304 Beige 305 Beige 400 Beige 402 Beige 404 Bronze 500 Bronze 504 Bronze 507 Bronze 600 Bronze 607 Bronze 708 Bronze 808 Blush Ivory Fawn Beige True Beige Delicate Beige Bisque Ivory, Natural Beige True Beige, Almond Beige Almond Beige, Toasted Beige, Cocoa Beige Natural Beige, Dusty Beige, Rose Beige Mocha Bronze Golden Bronze Bittersweet Bronze Walnut Bronze Classic Bronze, Rich Bronze, Deep Bronze Deep Bronze, Chestnut Bronze, Mahogany Bronze Mahogany Bronze Bronze 1.0 Bronze 1.5 Bronze 2.0 Bronze 2.0 Bronze 0.5 Beige 3.0 Beige 4.0 Beige 2.0......

Words: 351 - Pages: 2

Production

...Production Production Improvement, in every manufacturing industry is the core concept for the potential upliftment of an organisation. This Production Improvement contributes to various factors in the industry such as meeting the maximum demand in the market, Employee morale, Producing Cost Effective products and bringing the industry to global standards. Productivity Improvements are made for a sequential organisation of workers, tools, machine or parts. Thereby , some parameters has to be taken into consideration in order to have a accurate operation, so that the cycle time for each process is minimized and hence large numbers of products are manufactured, thereby meeting the customer requirements. The quality of processes, products and services is an important factor in business strategies, and therefore has been changed to suit the reality that businesses face. Then, companies have to continually improve their processes through the implementation of adequate methodologies and tools. The principles of productivity improvement is not only pertained with the Cutting rate and auxiliary parameters being performed, but also about their Quality Standards where, the number of defects are perfectly analysed and thereby giving a perfect solution for the cause using the statistical tools. In each and every industry, Quality is the final section of a single product before being exported. Thus, quality should be well analysed and organised in every single industry. In our......

Words: 318 - Pages: 2

Production System Make to Order Process Design

...Production System Make to Order process design The important objective of Toyota production System is to not manufacture in excessiveness and to avoid lack of uniformity in production (Toyota Production System, 2013). Toyota production System tries to eliminate waste of over production, eliminate waste of waiting time and to avoid waiting time of already manufactured products. Toyota production System uses "Make to Order" process design. All the manufactured inventory is stored in Toyota 'Store Shelf'. Any Toyota work center which needs any particular parts for its assembling station would go to the inventory storage point and pick up the required quantity off the shelf. The inventory storage point or the 'store shelf' regularly stocks the shelf just with limited quantity of parts (Toyota Production System, 2013). Once the work center withdraws the quantity from store shelf, Toyota production System manufactures same quantity of those particular parts and restocks the Store-Shelf. Manufacturing for a particular product starts at Toyota units only after order is received from a store shelf and only enough quantity is manufactured to fulfil the current order. That means the store shelf is always stocked to satisfy any new order and at the same time manufacture enough quantity to fill the store shelf. Toyota follows a pull-type operation for manufacturing. That is, Toyota production System manufacturing is being pulled by demand (Make to Order, 2013). In Toyota manufacturing,......

Words: 275 - Pages: 2

Production

...DEPARTMENT OF ECONOMICS AND BUSINESS STUDIES COLLEGE OF MANAGEMENT AND SOCIAL SCIENCES SECOND SEMESTER EXAMINATION 2013/2014 SESSION Course Title: Production Management Course Code: BUS 325 Time: 21/2 hour Instruction: Choose the one alternative that best completes the statement or answers the question. 1) Production/Operations Management is A) responsible for producing goods B) responsible for providing services C) system that create goods or services D) often referred to as the core of scientific management 2) Operations Management does not affect A) The collective success or failure of companies’ POM B) companies’ financial resources C) Nation’s ability to compete internationally D) Companies’ ability to compete 3) Which of the following part indicates the three Basic Functions? A) Finance, marketing and management B) Finance, human resources and management C) Marketing, operations and finance D) Operations, finance and scientific management 4) The steps of the conversion of inputs into outputs are: A) Input, process, transformation B) Labor, control, goods C) capital, land, service D) Input, conversion process, output 5) The operations function involves __________ A) The transformation process of inputs into outputs B) Feedback control C) Value added process D) Only goods process 6) Which of the following is not one of the input concepts? A) Labor B) Information C) Services D) Legal constraints ......

Words: 1798 - Pages: 8

Production

...junior sizes and king sizes of the coils, they offer also scented coils, and other specification of mosquito coils. (Source:www.lion-tiger.com) The researchers choose to study the Lion – Tiger Katol brand, regular size, which is commonly manufactured all throughout the seasons. Other products such as scented coils are manufactured when there are some orders from the customers. This study was conducted to determine the problems of the company, physical and conceptual problems that need an adequate corrective action plans. With the aid of researcher’s analysis and ideas, the management might improve their technical aspects as to production processes and its related aspects. Through the use of different methods and tools, the company could meet their ultimate goal and attain continuous improvement and reduces production waste. Theoretical/Conceptual Background Mosquito repellents help reduce or prevent mosquito bites that may lead to not only discomfort but also mosquito-borne diseases such as malaria and West Nile virus illness. Mosquito coils have been and are still the most commonly used mosquito repellents worldwide. Based on our personal communications with a mosquito coil manufacturer, it is estimated that 45 to 50 billion mosquito coils are used annually by approximately 2 billion people worldwide. To be effective, mosquito coils are typically used indoors, primarily at night during sleeping hours. The following are steps......

Words: 6925 - Pages: 28

Parsing Potato Starch Production Line Working Process

...unite for potato starch production line. Potato starch production line is complex and sophisticated process production, and now we can learn all machines by process method. It is very helpful to understand potato starch machine. The machine picture will be added for unite process unite. All will more intuitive. Fully automated POTATO STARCH PRODUCTION LINE will go through and monitor all production stages, including even transportation and bagging. Potato convey into the inverse spiral de-stoner by water to undertake cleaning and de-stoning. De-stoner is divided into two sections, the de-sanding drum and the cylindrical screen; the screen opens screen holes on the technique requirements. Their main equipments will have as components drum washers, destoners, raspers, desanding units, dewatering systems, vacuum filters and hydrocyclone units, driers, packaging machines and control interfaces. When the de-stoner is working, the sand less than screen hole diameter, leaks to the sieve cylinder outside from screen holes, goes forward upstream under the action of inversion spiral belt of the sieve cylinder outside wall, falls into the sand catcher in front of the de-stoner, then the sand is discharged to a stone and impurities discharge outlet through a discharging sand plate by a sand dump drum. We can use different type of raw material such as flour of potato starch, more and many more. Our experts have specifically designed potato starch production line in compliance with...

Words: 259 - Pages: 2

Production

...1.1 Chuck Sox makes wooden boxes in which to ship | motorcycles. Chuck and his three employees invest a total of 40 | hours per day making the 120 boxes. | a) What is their productivity? | | Total hours invested in production=40 hours per day | | produced number of boxes in a day=120 | | | | Productivity per day is =units produced/input used | | productivity per day is =120 boxes/40 hours | | productivity per day = 3 boxes per day | | | | their producivity is 3 boxes per day | | | b) Chuck and his employees have discussed redesigning the process | to improve efficiency. If they can increase the rate to 125 | per day, what will be their new productivity? | | | | New productivity=Units produced/number of hours | | New productivity=125 boxes/40 hours | | New productivity =3.125 boxes per day | | | | | c) What will be their unit increase in productivity per hour? | | | | Productivity per hour at 120 boxes = 3 boxes | | Productivity per hour at 125 boxes = 3.125 boxes | | Increase in productivity = 3.125-3 | | Increase in productivity = 0.125 boxes per day | | | d) What will be their percentage change in productivity? | | | | Productivity 120 boxes= 3 boxes per hour | | Productivity 125 boxes= 3.125 boxes per hour | | Change in productivity = 3.125-3/3 | | Change in productivity = 0.125/3 | | Change in productivity = 0.0416 or 4.167% | | | | The increased of......

Words: 687 - Pages: 3

Production Process and Management

...Production Process and Management Analyze Marathon’s product process and determine which phase is open to the greatest number of efficiency improvements. Marathon is among the top five crude oil refineries in the United States. It’s an integrated international energy company engaged in exploration and production of oil, sand mining, integrated gas, refining, marketing, and transportation operation. Marathon needs to upgrade a few of their refineries and pipelines in order to increase the production process of heavy crude oils, (marathon.com). For example, once the Detroit Heavy Oil Upgrade Project is completed, the refinery crude capacity will increase from 106,000 bpd to 115,000 bpd. The upgrades will allow the Detroit refinery to process an additional 80,000 barrels of heavy crude oil per day (detriothoup.com). The existing pipelines at the Detroit refinery do not have the capacity to transport additional volumes of crude oil to meet the refinery’s upgrade needs. Therefore a 1.5-mile pipeline will provide an alternative oil supply line to the refinery and provide extra security in the event of a supply disruption. Pipelines are the safest and the most efficient way to transport crude oil and other liquid petroleum products. They reduce traffic and pollution as well as provide economic benefits. Pipelines transport two-thirds of all the crude oil and refined products in the U.S. compared to three percent by tanker trucks. According to detriothoup.com, currently...

Words: 1441 - Pages: 6

“Post Production Is a Real Creative Process”. in Your Own Experience, How Did Post Production Enable You to Explore Media Practices in Your Coursework?

...“Post production is a real creative process”. In your own experience, how did post production enable you to explore media practices in your coursework? The brief for the task in the preliminary task was to create a short extract in which there are two lines of dialogue, an opening of a door at some point, all the while keeping to the 180’ rule and ensuring continuity is constructed. In the final piece the brief was slightly different as it was to construct an opening to a horror production, establishing both character and genre. We did this through camerawork, editing, mise-en-scene, and sound. We decided to make our piece within the supernatural sub-genre, in which two teenage boys search an abandoned house to test the tales of hauntings that have taken place over the years. Normal conventions have been reversed as we have male victims (protagonists) with a female antagonist. Post production was an important aspect of this as editing enabled us to construct continuity and add certain effects in order to make our piece look as professional as possible. To create a professional feel we added a camera overlay with reduced opacity to the handicam shots in order to create a more realistic look as if someone were using a hand held camera. We did this both in our preliminary task along with our final piece as we like the effect it created. A specific example of when it was used is within our final piece in the handicam shot of Alex and Fin walking through the dark hallway...

Words: 578 - Pages: 3

Production Process and Management

...Analyze Marathon’s product process and determine which phase is open to the greatest number of efficiency improvements. Marathon is among the top five crude oil refineries in the United States. It’s an integrated international energy company engaged in exploration and production of oil, sand mining, integrated gas, refining, marketing, and transportation operation. Marathon needs to upgrade a few of their refineries and pipelines in order to increase the production process of heavy crude oils, (marathon.com). For example, once the Detroit Heavy Oil Upgrade Project is completed, the refinery crude capacity will increase from 106,000 bpd to 115,000 bpd. The upgrades will allow the Detroit refinery to process an additional 80,000 barrels of heavy crude oil per day (detriothoup.com). The existing pipelines at the Detroit refinery do not have the capacity to transport additional volumes of crude oil to meet the refinery’s upgrade needs. Therefore a 1.5-mile pipeline will provide an alternative oil supply line to the refinery and provide extra security in the event of a supply disruption. Pipelines are the safest and the most efficient way to transport crude oil and other liquid petroleum products. They reduce traffic and pollution as well as provide economic benefits. Pipelines transport two-thirds of all the crude oil and refined products in the U.S. compared to three percent by tanker trucks. According to detriothoup.com, currently 100,000 barrels of crude per......

Words: 313 - Pages: 2

Title: Hydrogen Production by Onboard Gasoline Processing - Process Simulation and Optimization

...journal homepage: www.elsevier.com/locate/enconman Hydrogen production by onboard gasoline processing – Process simulation and optimization Vega Bisaria, R.J. Byron Smith ⇑ Process Systems Laboratory, School of Mechanical and Building Sciences, Vellore Institute of Technology University, Vellore 632014, Tamil Nadu, India a r t i c l e i n f o Article history: Received 5 September 2012 Accepted 2 August 2013 Keywords: Onboard fuel processor Hydrogen Fuel cell vehicles Process Simulation a b s t r a c t Fuel cell vehicles have reached the commercialization stage and hybrid vehicles are already on the road. While hydrogen storage and infrastructure remain critical issues in stand alone commercialization of the technology, researchers are developing onboard fuel processors, which can convert a variety of fuels into hydrogen to power these fuel cell vehicles. The feasibility study of a 100 kW on board fuel processor based on gasoline fuel is carried out using process simulation. The steady state model has been developed with the help of Aspen HYSYS to analyze the fuel processor and total system performance. The components of the fuel processor are the fuel reforming unit, CO clean-up unit and auxiliary units. Optimization studies were carried out by analyzing the influence of various operating parameters such as oxygen to carbon ratio, steam to carbon ratio, temperature and pressure on the process equipments. From the steady state model......

Words: 4647 - Pages: 19

Production

...protects the other phases of the purification process. Sewage contains a lot of solid waste and grease that may cause problems in the later stages of the process. The pre-treatment process reduces the amount of solids in the waste water. Effective wastewater pre-treatment also reduces the need for oxidation. The pre-treatment is mechanical and consists of sieving and sedimentation units. The large particles pass through a shredding pump before sieving. Oxidation The mechanical filtering results in a maximum of 50% reduction in organic load. The remaining organic compounds have to be oxidized, either chemically or biologically.Certain chemicals, e.g. ozone, chlorine, hydrogen peroxide, are added to the sewage in the chemical oxidation. The chemicals oxidize the organic impurities in the sewage water. When compared to the ozone and hydrogen peroxide, chlorine is not a very environmental friendly oxidant because of the carcinogenic compounds that develop as a by-product of the reaction. The added chemicals have an impact on the organic matter that has dissoluted slightly and the BOD reduction remains small. The estimated treatment results for reduction in BOD and phosphorus are good Clarification and filtration After oxidation, the sludge is separated in a sedimentation tank and returned to the aeration tank. Separating the active biomass, sediment particles and bacteria from the water is a critical phase in the wastewater purification process. The clarification and filtration......

Words: 1574 - Pages: 7

How Auto Manufacturers Should Choose Among Substitutable Inputs and Production Process.

...CASE STUDY ANALYSIS A-CHAPTER 5 (by Yagmur Pekoz) Question 1: Explain fully how auto manufacturers should choose among substitutable inputs and production processes. Discuss in detail and apply the related concepts. Answer 1: Both the demand and the unit price for steel have increased in recent years. Unfortunately, auto manufacturers use large quantity of steel in their production process. In order to compensate for the adverse effect of increased unit price of steel, auto manufacturers changed their output and pricing decisions to be profitable. Moreover, they started searching new overseas suppliers and cheaper raw materials, e.g. aluminum, to substitute steel in the production process. In addition, auto manufacturers intensified their search on new means and methods to utilize plastics, magnesium, and recyclable materials in their production process. All these new ideas aimed to make auto manufacturers more profitable. Generally, we can substitute one input with another, however, the case is not always as easier as it seems. As mentioned before, firms usually substitute one or more inputs with another to be profitable. The above idea of substitution can be demonstrated simply as Q = (S) ½ x A½ where S is steel and A is aluminum. This equation is called ‘production function’. According to this equation, for example, the same amount of auto parts (let us say 100 for the sake of argument) can be produced using either 100 pounds of steel (S=100) and 100 pounds of......

Words: 3167 - Pages: 13