Lan Topologies

In: Computers and Technology

Submitted By LordBones
Words 817
Pages 4
LAN Topologies
Lord Bones
IT240
Jan 01,
University of Phoenix - AXIA College

LAN Topologies
With this assignment I will discuss some topologies of a LAN as requested by questions 11, 12, and 13, chapter three from the textbook Local Area Networks. A “LAN (Local Area Network) topology is the appearance or layout of a network” (Regan, 2006). There are two forms of topologies of a network, namely, the physical- and logical topology with each its own types of topologies. The physical topology is what someone can see with his or her own eyes, i.e. a workstation, servers, cables, etc. while the logical topology is the dataflow of the network, how the data is moving from one point to another (Regan, 2006). In the following I will describe two physical topology types and one logical topology type, following the scenarios in the question’s mentioned above.
In the first scenario there are four servers in the network with no hub present. The first (A) server is connected to the second (B), third (C), and the fourth (D). The second is connected to the third and fourth, while the third is connected to the fourth. (See figure 1.) This type of physical topology is called a Mesh Topology. A Mesh Topology is a topology where “every computer is linked to every other computer” (Regan, 2006). With this type of topology there is no hub or a similar device present. Also this type is difficult to install and certainly when it has to be reconfigured when a new computer is added to the network and the amount of cables increases dramatically. In the above example there are six cables, but when a server is added the amount of cables increases to nine cables. As you can see it is not a very efficient layout for a LAN network, but there are other topologies that are easier to install and to expand, one of them is the Star Topology which be discussed in the second scenario.…...

Similar Documents

Lan Topologies

...LAN Topologies LAN Topologies Ashley Jones University of Phoenix Case Project 2-1 This Case Project explains a network comprised of 50 computers that are connected to 10 Mbps hubs. It goes on to explain the collisions that are occurring when multiple stations send data simultaneously. This description indicates the network is using a logical bus topology because of the 10 Mbps hubs it utilizes. In addition, they are experiencing collisions; in a logical bus topology, data transmitted on the network is viewable by other nodes. The physical topology of this network seems to be an extended star. Since a multiport repeater/hub can have up to 24 ports, they can lay this network out in many different ways. If there is enough office space, they could set up 5 different offices of 10 stations. Each set of 10 would be connected to one 10 Mbps hub and form a physical star. Each of these hubs can be connected to a central hub that is used to extend the network. Case Project 2-2 This Case Project advises of a network that has 200 workstations and four servers connected by multiple switches. The network incorporates a physical star topology because all of its devices come together at a central location. More specifically, this exended star topology allows about 20 workstations to connect to one switch. This setup is repeated multiple times, all with 20 workstations connected. Another switch sits in the “center” of this setup and attaches to one of the switch......

Words: 350 - Pages: 2

Lan Topologies

...LAN Topologies IT240 10/14/12 1. Case Project 2-1 With a network of 50 computers I will use the Ring Topology to upgrade this network. With this type of topology all the devices are connecting in a loop form and the information travels in one direction, thus avoiding collisions. Here the cabling doesn’t terminate, it continually goes from one device to another till it gets back to the original device. It is also easier to manage the network since all the information is passed around the ring in the same direction. 2. Case project 2-2 With that many computer and four servers, I will use an Extended Star Topology. As pointed out in the case project that there are a few switches available here, I will use a central switch and connect the rest of the available switches to it and connect the 200 PC’s to those switches. Switches are good for determining each individual packet’s destination and ensuring that they are delivered to the right device. Note Even though they might have two different uses in some cases, the hubs in my diagram represent the switches. 3. Case project 2-3 * Physical versus logical topology: A physical topology defines how the devices on a particular network are physically connected; logical on the contrast tells us how the systems on the...

Words: 415 - Pages: 2

Network Topologies

...Network Topologies. Hierarchical Star. the star network is one of the most popular network topology. In this network, all the nodes are connected individually to one common hub. In other words, it is a network topology wherein transmission stations are connected to the central node in such a manner that the design resembles the shape of a star. Basically, the star topology design is quite similar to a bicycle wheel with spokes radiating from the center. Advantages and Disadvantages It is very easy to install and manage star network topology as it is the simplest of the lot when it comes to functionality. It is easy to troubleshoot this network type as all computers are dependent on the central hub which invariably means that any problem which leaves the network inoperable can be traced to the central hub. In star topology, the data packets don't have to make their way through various nodes which makes sure that the data transfer is fast. The foremost problem with star network topology is the fact that it is highly dependent on the functioning of central hub. The size of the network is dependent on how many connections can be made to the hub. This network type requires more cable as compared to linear bus topology which means the expenses incurred would be relatively high. The performance of the entire network is directly dependent on the performance of the hub. If the server is slow, it will cause the entire network to slow down. Bus Topology Bus Topology is the......

Words: 648 - Pages: 3

Lan, Man and Wan Network Topologies

...There are many different types of network topologies, but the three most common types are LANs, MANs, and WANs. The LAN topology is probably the most common of the three. The MAN and WAN topologies are used but not nearly as much as the LAN topology is, although the WAN is starting to be used more and more because of the growing population of networks. The LAN (Local Area Network) is used so much because it is used in small areas. Small businesses use LANs a great deal because they are small and they wouldnt need a WAN or a MAN because there business is usually ran out of one or maybe two buildings. You will usually find LANs in buildings, schools, and even in homes at times. Some buildings even have multiple LAN's in them for certain purposes. When designing the layout of a LAN, the party can choose from a selection of different technologies on which to base the main part of their LAN. The technology choices that the party adopts will be a critical part in the way their LAN performs. Two important LAN setups are a network based on Ethernet or Token Ring technology. Besides operating in a small space, LANs have some other distinctive features. LANs are typically owned, controlled, and managed by a single person or organization. A WAN (wide area network) goes across large physical distance. Many times a WAN will go almost around most of the world! The most popular WAN is the Internet. The Internet is one big huge WAN and it is also the most used WAN. A WAN is basically...

Words: 522 - Pages: 3

Lan Topologies

...Aybar IT/240 LAN Topologies Scott Perales April 27, 2014 Case 2-1 I would recommend the use of a central server which will ease up the process of controlling the incoming and outgoing data transmission. The central server will help the network not get overloaded with the amount of data packets being received and sent. In relation with the Hubs, it will be beneficiary to update them to be able to hubs with the capacity of 1,000 Mbps. This will also help with the overall network performance. Case 2-2 In this case, I will replace the switches and install routers instead. Routers have a better capability in joining together multiple LAN networks with WAN. Routers serves as a median destination for the network traffic. The routers with these workstations will be able to receive, analyzed the source and potential target, and where every packet will need to be sent to. Switches in this scenario, are not able to separate the broadcast domain like the router could; switches are only able to separate the collision in the domain. A network with only switches (hubs) must instead designate one computer as the gateway to the Internet, and that device must possess two network adapters for sharing, one for the home LAN and one for the Internet WAN. (Mitchell, 2014).  Case 2-3 Logical/physical topology: A logical topology is the......

Words: 452 - Pages: 2

Lan Topologies Assignment

...February 8, 2014 February 8, 2014 LAN Topologies Assignment Case Project 2-1 You have been hired to upgrade a network of 50 computers currently connected to 10 Mbps hubs. This long-overdue upgrade is necessary because of poor network response time caused by a lot of collisions occurring during long file transfers between clients and servers. How do you recommend upgrading this network? What interconnecting devices will you use, and what benefit will you get from using these devices? Write a short memo describing the upgrade and, if possible, include a drawing of the new network. I have been recently hired to upgrade a company’s current network. Currently this company has a 10BaseT network established (Regan, 2004). This client is stating that they need to increase the overall bandwidth to the network and is having collisions issues occurring within the network which is causing more latency within the network. My two primary recommendations to upgrade this network are to; first go from a 10BaseT network to a 100BaseTX network, and second replace any hub currently in use with a switch capable of 100BaseTX data transfer standards. Transferring from a 10BaseT to a 100BaseTX network will require the additional purchase of networking devices but will increase the overall bandwidth from 10 Mbps to 100 Mbps for each user in the network (Regan, Local area networks, 2004). By replacing the outdated hubs currently in use with switch will create a more specific collision domain...

Words: 1319 - Pages: 6

Communication Topology

...TOPOLOGY: Local Area Networks (Hybrid Topology) A conceptual diagram of a local area network with the features of Bus topology combined with Ring topology. A design that utilizes a single length of cable, also known as the medium, with directly attached LAN stations. All stations share this cable segment. Every station on this segment sees transmissions from every other station on the cable segment; this is known as a broadcast medium. The LAN attachment stations are definite endpoints to the cable segment and are known as bus network termination points. This single cable segment lends itself to being a single point of failure. If the cable is broken, no LAN station will have connectivity or the ability to transmit and receive. For the Ring connection, all stations in a ring topology are considered repeaters and are enclosed in a loop. Ring topology has no end points. The repeater in this case is a function of the LAN-attached station’s network interface card (NIC). Because each NIC in a LAN-attached station is a repeater, each LAN station will repeat any signal that is on the network, regardless of whether it is destined for that particular station. If a LAN-attached station’s NIC fails to perform this repeater function, the entire network could come down. The NIC controller is capable of recognizing and handling the defective repeater and can pull itself off the ring, allowing the ring to stabilize and continue operating. SERVICES/FEATURES: AZIMUTH FREIGHTER......

Words: 288 - Pages: 2

It/240 Lan Topologies

...LAN Topologies It 240 Week 2 Assignment: LAN Topologies IT/240 Week 2 Assignment 1. Case Project 2-1 With a network of 50 computers I will use the Ring Topology to upgrade this network. With this type of topology all the devices are connecting in a loop form and the information travels in one direction, thus avoiding collisions. Here the cabling doesn’t terminate, it continually goes from one device to another till it gets back to the original device. It is also easier to manage the network since all the information is passed around the ring in the same direction. 2. Case project 2-2 With that many computer and four servers, I will use an Extended Star Topology. As pointed out in the case project that there are a few switches available here, I will use a central switch and connect the rest of the available switches to it and connect the 200 PC’s to those switches. Switches are good for determining each individual packet’s destination and ensuring that they are delivered to the right device. Note- Even though they might have two different uses in some cases, the hubs in my diagram represent the switches. Case project 2-3 * Physical versus logical topology: A physical topology defines how the devices on a particular network are physically connected; logical...

Words: 422 - Pages: 2

Topologies

...Running head: IDENTIFYING NETWORK TOPOLOGIES Identifying Network Topologies Susan Green ITT Client-server Networking NT1230 Mr. Travis October 05, 2014 Identifying Network Topologies Identifying Network Topologies HW3 Multiple-Choice Questions 1) C 2) B 3) B,D 4) C,D 5) A 6) D 7) B 8) B 9) A,C,D 10) C,D 11) A 12) B,D 13) D 14) C 15) A,D 16) B 17) A 18) C 19) A 20) B Key Terms TCP/IP-network- A computer network that uses the standards defined and referenced by the TCP/IP model. Networking standard- A document that details information about some technology or protocol related to networking, and that document has been passed through a review and approval process that certifies the document as a standard. TCP/IP model- An open collection of standards related to all parts of networking, grouped together purposely, the different network components will work together correctly. Open network model- A networking model whose standards can be read and used to create products without payment to any one company. Open Systems Interconnection model (OSI)- An open networking model developed by ISO over the same time frame as TCP/IP. Encoding- The process of varying the energy signal on a link so that after the signal is decoded on the receiving device, bits have been communicated over the link. Header- Bytes of data, defined by some standard or protocol, and added in front of the user......

Words: 452 - Pages: 2

Lan Topologies

...Project 2-2 Two hundred workstations and four servers on a single LAN are connected by a number of switches. You’re seeing an excessive number of broadcast packets throughout the LAN and want to decrease the effect this broadcast traffic has on your network. What steps must you take to achieve this goal? Ideally it’s preferable to probably split it up into one or more workstation subnets (based on say, departments) and then another subnet (or more for a larger enterprise) for the servers. Traffic between the subnets will be routed. This means the broadcasts from workstations won't hamper the servers and vice versa. Case Project 2-3 In Chapter 3, you learn about network topologies and technologies. As preparation, do Internet research on the following topics: ● Physical versus logical topology ● Bus topology ● Star topology ● Ring topology ● Ethernet and CSMA/CD Write a short explanation (two to three sentences) of each concept and be prepared to discuss it with the class. Physical vs. Logical Topology – The term physical topology refers to the physical structure of the network, such as the method used to connect workstations to the actual cables, which transmit the data. Logical topology on the other hand, relates to the way that signals act upon the network media and the path that data takes as it moves around the network, regardless of the physical configuration of the devices. Bus Topology – A bus network is configured so that all of the various......

Words: 749 - Pages: 3

Lan Topologies

...LAN Topologies Jason Smith IT/240 September 7 2014 TAMMY FLEMONS LAN Topologies Case Project 2-1 You have been hired to upgrade a network of 50 computers currently connected to 10 Mbps hubs. This long-overdue upgrade is necessary because of poor network response time caused by a lot of collisions occurring during long file transfers between clients and servers. How do you recommend upgrading this network? What interconnecting devices will you use, and what benefit will you get from using these devices? Write a short memo describing the upgrade and, if possible, include a drawing of the new network. This system ought to have a central server that can control approaching and cordial transmissions. A central server would prevent the whole system from being hindered due to information parcels being sent and acquired. What's more, the center points ought to be moved up to handle 1000 Mbps. The following is a sample of what a littler variant would look like. I think I would use the physical star topology for this setup. Case Project 2-2 Two hundred workstations and four servers on a single LAN are connected by a number of switches. You’re seeing an excessive number of broadcast packets Throughout the LAN and want to decrease the effect this broadcast traffic has on your network. What steps must you take to achieve this goal? Utilizing an expanded star topology would diminish the impacts of the......

Words: 677 - Pages: 3

Lan Lan Lan Aland

...LAN Operating Systems Scenarios Read the three scenarios below and answer the questions that follow each scenario. 1. You are the network administrator for a new company that has 10 users and that plans to add 5 more users within a year. The files need to be accessed by all 10 users, and each user must have different security rights. What kind of network would you install? How would the pieces and components of this network relate to each other? Define each component. 1.2. I would install a client/server network on a local area network (LAN). Every computer connected to the network would have a network interface card (NIC) and through the use of Ethernet cables, connect to the company server. Users would be able to store files and share company resources through the server. Implementing a Windows based operating system on the server will allow for the network administrator to assign different security rights and privileges to different users. I think that for this particular situation I would set up an extended star network. I would choose this one because the business is relatively small and plans to grow, this type of network setup is very easy to add users onto and also still provides the access restriction needed for lower level employees and the ease of access for higher level employees without them being able to see what the other is able to access. “As the name implies, this topology is a star of stars. A central device, usually a switch, sits in the middle...

Words: 583 - Pages: 3

Topologies

...NETWORK TOPOLOGIES | Mukesh RaoDepartment of Computer Sc. & Engg. School of Engineering and Technology Sharda University, Gr. Noida UP, INDIA Mysteriousrao@gmail.comApril 14, 2015 | Abstract In recent days for computing, distributed computer systems have become very important and popular issue. It delivers high end performance at a low cost. Computers are connected by means of a communication network in a distributed computing environment which is arranged in a geometrical shape called network topology. In the present paper a detailed study and analysis on network topologies is presented. Definitions of Physical and Logical Topologies are also provided. Introduction Network Topology is the study of the arrangement or mapping of the elements (links, nodes, etc.) of a network interconnection between the nodes. Topologies can be physical or logical. Physical Topology means the physical design of a network including the devices, location and cable installation. Logical Topology refers to the fact that how data actually transfers in a network as opposed to its design. Some of the most common network topologies are: Physical Topology Physical Network Topology emphasizes the hardware associated with the system including workstations, remote terminals, servers, and the associated wiring between assets. Physical topology defines how the systems are physically connected. It means the arrangement of devices on a computer network through the actual cables......

Words: 908 - Pages: 4

Lan Wan

...Local are networks (LAN) is a computer network covering a small geographic area, like a home, office, school, or group of buildings. Has a High speed (1000 mbps) Tends to use certain connectivity technologies, primarily Ethernet and Token Ring. LANs tend to have fewer problems associated with them, as there are smaller numbers of systems to deal with. Wide area network (WAN) is a computer network that covers a broad area. It does have slower speeds of about 150 mbps. WANs tend to use technologies like MPLS, ATM, Frame Relay and X.25 for connectivity over longer distances Differences between (LAN) & (WAN) (LAN) is typically owned and managed by a single company or organization. LAN also experiences fewer data transmission errors and overall fewer problems as a whole as opposed to WAN. WAN has a high cost maintenance and lower bandwidth. In conclusion the major differences are going to be cost, efficiency and coverage Describe common physical topologies and a logical topology : Physical topology refers to how the network is wired it can be either a ring topology where all the hosts are connected together or a bus topology where there is a network medium and each host connects to that medium by wire. A logical topology in the other hand governs how the network is going to work. For example all the hosts in the network are connected through a central connecting point that’s the physical topology however the way the protocols and hardware are designed to......

Words: 273 - Pages: 2

Topologies

...Bus Topology is used for small and simple networks. Bus topology connects all computers in a linear shape with a backbone to connect all computers. A single cable is used to connect all computers devices with interface connector. A single device send message towards other devices attached with it but only intentional recipient accept and process the message. A central device like hub, router and switch is used to connect all computers in Star Topology. The functionality of connected devices is entirely different from each other in star topology because it may be Shielded Twisted Pair (STP) cable or UTP cabled. The STP stands for shielded twisted pair cable and UTP stands for unshielded pair cable. It is a most usable topology in local area network from all over the world. In Ring Topology all computers are situated in the form of a ring and each computer connected within two neighbor’s computer by the means of communication. In Ring topology all computers communicate with each other clockwise or counter-clockwise. The use of ring topology is increasing day by day because a network can be easily implemented in home, office, building, and school. Ring topology has some benefits such as equal access to everyone, transformation of data at very high speed but has disadvantages like the fault in any cable or wire may cause of failure network. Mesh Topology designed on the concept of Router because its work depends on router. When a user send a message to any other user, then......

Words: 863 - Pages: 4