Free Essay

Airframes and Flat Panel Antennas Match

In: Business and Management

Submitted By prateepbasu
Words 495
Pages 2
With huge capital expenses for High Throughput Satellite (HTS) infrastructure and services made by satellite operators, industry focus now shifts to maximizing the returns on these investments. As 24/7 connectivity becomes a necessity rather than a luxury, the need for lightweight, low-cost, and high performance satellite terminals has driven the evolution of ground segment equipment, for which flat panel antennas (FPAs) have emerged as the most popular innovation in recent years.

The limited speed and large size of mechanically-steered and the 1st generation of electronically-steered flat panel antennas drew many to wonder if the Holy Grail of the satellite world – a cost-competitive, electronically-steered flat panel antennas with an ultra-low profile- would ever be within reach. But the journey to this goal has been a long, difficult one because of the many desired features of such a product as depicted in the figure below.

NSR has often noted the tremendous increase in satellite mobility bandwidth demand has driven many operators to add new HTS systems and constellations to meet this demand. But at the same time, the industry metric has put more emphasis on cost-efficiencies, which is where NSR expects flat panel antennas (FPAs) to play a key role in this transformation. As service providers look to provide more bandwidth at lower cost to end-users, falling capacity prices, next generation modems with beam switching capabilities, and better software are icing on the cake of the HTS capacity onslaught, in which FPAs are a perfect fit.

In NSR’s recently released Flat Panel Satellite Analysis report, both the mobility and fixed satellite side of the business were analyzed, and commercial aeronautical connectivity was observed on top as the biggest driver and revenue generator for FPAs. Indeed, a low-profile antenna is a necessity for lower drag and higher fuel efficiency in this market. Despite lower volumes overall in mobility markets, these FPAs with their higher complexities and more stringent requirement have higher per unit costs and drive the market. Revenues generated by equipment manufacturers in this vertical are expected to reach close to $400 million by 2025, at a staggering 32% CAGR .

But what is more telling is that over half of revenues will be generated by FPAs operating in Ku-band as aircraft flying on these systems already have a leg up on other frequency bands. Still, Ka-band FPAs are also expected to grow strongly due to operators such as ViaSat and Inmarsat expanding their services aggressively during the forecast period, and the diverse airframe types (and routes) in the addressable market.

Bottom Line

The next generation of steerable and bandwidth efficient FPAs will be key for extracting the maximum value proposition out of HTS services, with aeronautical connectivity being the biggest market for equipment manufacturers. Despite many obstacles associated with low-elevation look angles, adjacent satellite interference, and skewing issues, NSR expects these FPAs to find a match on many airframe markets.

Facebook Tweet LinkedIn Email…...

Similar Documents

Free Essay

Levitating Match

...Levitating Match I. Introduction The same effect can be seen in many domestic thermostats. It can be amplified by attaching two strips of material together with different rates of expansion (a bimetallic strip). As the temperature rises, the greater expansion on one side of the strips causes it to curve further and further. This can be incorporated into a switch that will connect and cut off a heating apparatus when a particular temperature has been reached. II. Objective/s • The performer should align the matches symmetrically. • One match should levitate when lighted. • The audience should see the levitation. III. Materials and Procedures Materials: Matchbox (empty) 3 matches Procedure: 1. Lay the empty matchbox flat on the table, slightly open, with the empty section facing upwards. 2. Insert two matches into the empty matchbox so that the heads point out from the matchbox. Close the matchbox as much as possible so that the two matches are securely held. 3, Angle the two matches so that the heads are touching. 4. Rest a third match so that the head meets the other two, and the tail is resting on the table, pointing away from the empty matchbox. The three matches should now form a triangular pyramid shape with the three heads at the top point of the pyramid. 5. Use a fourth match to light the others from underneath. 6. Watch as the third match levitate. IV. Magic behind / Physics Principle When the three match heads ignite they...

Words: 319 - Pages: 2

Free Essay

Photovoltaic Panels

...Name: Institution: Course: Tutor: Date: Photovoltaic Panels Contribution to Generate Electricity and Reducing CO2 Emissions Executive Summary The increased use of energy has culminated in environmental pollution because of the characteristic release of green house gases in the atmosphere. There are two types of energy; renewable and non renewable sources. Renewable sources are the most ideal because they can never be exhausted and they do not emit any pollutants to the environment. As non renewable energy resources become depleted, global nations are exploring other energy options that would cater for their diverse energy needs without undermining the quality of the environment. Increasingly, solar energy is being explored in the United Sates as it is the most readily available. Most importantly, technological research indicates that it greatly reduces the amount of carbon dioxide that is released in the environment. To harness this energy, photovoltaic Panels are employed. The importance of photovoltaic panels in harnessing solar energy has prompted the initiation of certain developments in order to enhance their efficiency and make them economically competitive. Currently, tests are underway to determine the effectiveness of photovoltaic cells that are made from silicon. Future plans are focusing on the need to reduce relative costs in a bid to enhance economic viability. These work by converting the protons form solar energy to electricity. This form of...

Words: 830 - Pages: 4

Premium Essay

Solar Panel

...will still be thousand times greater than the likely electricity demand in India by the year 2015. This energy from the sun is used as solar thermal and solar power applications. Solar thermal energy, through various technologies, is utilised for various purposes which includes Heating, Drying, Cooking, seasoning of timber, water treatment (Distillation and disinfection), Cooling (Refrigeration and Cold storage), High temperature process heat for industrial purposes. 1.4 BIPV- The future of solar energy Solar energy is not only about present but it also about future. The unlimited potential of Solar is visible in its varied applications of energy generation. One such power of solar can be seen today with homes being energised by solar panels. This energy accelerates cost saving as electricity bill is reduced to about 30% with incorporation of solar power. Buildings are the largest consumers of electricity using over 40% of the world electricity. The developers, consultants, architects, investors and contractors are opting for alternative forms of energy without damaging the environment as we incline towards passive energy buildings. Solar technology in form of solar Photovoltaic is a proving to be a reliable solution for electricity generation. Photovoltaic literally stands for 'electricity from light'. A photovoltaic cell, also called as PV cell, is a special semiconductor diode that converts visible light into DC (direct current). Certain PV cells are able to transform......

Words: 1598 - Pages: 7

Premium Essay

Solar Panel

...Title: Innovation and Solar Energy in Power Generator Introduction Solar power generator is device that uses solar energy as main power to generate the energy. It captures energy from the sun through solar panels and stores in self-contained batteries. The most benefit solar power generator is environmental friendly, good for health and “viable and cheaper” Topic Sentence One Supporting points: solar power generator is environmental friendly and great medium to preserve environment. A) What makes this solar power generator become good for environment? B) Why it become perfect to indoor activity? C) Who will get the benefit of this fresh environment? Topic Sentence Two Supporting points: Solar power generator give no harmful and goof for the health. A) What will make the health not affected when using this device? B) Why fuel not being used widely by this solar power and what will happen. C) Who will get the effect if wrongly-use of fuel in other generator? Topic Sentence Three Supporting points: Solar power generator using solar energy as source of energy which is viable and cheaper. A) How its working? B) What is the component use to capture this energy? C) Why solar were used and become the main source? Conclusion Solar power generator playing important role in organizer’s plans for variety of different reason. Besides being free and viable, it is also give o harmful and food for health. It give great advantage to human, animal and environment. ...

Words: 295 - Pages: 2

Premium Essay

World Id Flat

...E. Stiglitz wrote in The New new York Times reviewing The World Is Flat in 2005. In this edition, Thomas L. Friedman includes fresh stories and insights to help us understand the flattening of the world. Weaving new information into his overall thesis, and answer­ ing the questions he has been most frequently asked by parents across the country, this third edition also includes two new chapters—on how to be a political activist and social entrepreneur in a flat world; and on the more troubling question of how to manage our rep­ utations and privacy in a world where w e are all becoming publishers and public figures. The World Is Flat 3.0 is an essential update on globalization, its opportunities for individual e m p o w e r m e n t , its achievements at lifting millions out of poverty, and its drawbacks—environmental, social, and political, powerfully illuminated by the Pulitzer P r i z e - w i n n i n g author of The Lexus and the Olive Tree. "This book showcases Friedman's gift for lucid dissections of abstruse economic phenomena, his teacher's head, his preacher's heart, his genius for trend-spotting." — W A R R E N B A S S . THE WASHINGTON POST "Nicely sums up the explosion of digital-technology advances during the past fifteen years and places the phenomenon in its global context." - P A U L MAGNUSSON. BUSINESSWEEK "[This book's] insight is true and deeply important.... The metaphor of a flat world, used by Friedman to describe the next phase of......

Words: 263079 - Pages: 1053

Free Essay


...Name Instructor Course Date Antennas This report provides details of different types of antennas used in ships as well as maintenance procedures and precaution measures when dealing with antennas. An Antenna is a component capable of radiating and capturing radio waves. Thus, antennas are useful elements of a ship and together with radio equipment are a means of communication between the vessel and the control tower. The first type of antenna used on ships is the quarter wave vertical antenna widely used at all frequencies from MF to VHF. The quarter wave vertical antenna is simple to construct and erect in locations with limited space like a ship. For VHF and UHF, it is important to elevate the antenna above close obstacles. One advantage is that, the single element vertical antennas have a multi-directional radiation design meaning they do not require re-alignment in a mobile application and are thus suitable for ships. A quarter wave aerial with a quarter-wave radials exhibits 50-ohms impedance thus uses a 50-ohm coaxial cable (Stutzman and Thiele). In summary, the quarter wave antenna is popular for its convenience and simplicity. The second type of antenna is the dipole antenna that is one of the commonly used RF antenna types. Primarily, it consists of two poles into which radio frequency current flows and together with a voltage causes radiation of a radio signal. There are several types of dipole antennas that include, half wave dipole, multi-half......

Words: 1149 - Pages: 5

Premium Essay

Control Panel

...LOGIC NT1110 Jesse Allen UNIT8. LAB8.2 CONTROL PANEL Gus Perez 19593003 Salem, Oregon. TASK Make a report on the Windows Control Panel with screen shots and your experience with control panel. The Control Panel for Windows7 on a Network Control Panel for a PC Control Panel The Control Panel is a part of the Microsoft Windows graphical user interface which allows users to view and manipulate basic system settings and controls via applets, such as adding hardware, adding and removing software, controlling user accounts, and changing accessibility options. Additional applets can be provided by third party software. The Control Panel has been an inherent part of the Microsoft Windows operating system since Windows 2.0, with many of the current applets being added in later versions. Beginning with Windows 95, the Control Panel is implemented as a special folder, i.e. the folder does not physically exist, but only contains shortcuts to various applets such as Add or Remove Programs and Internet Options. Physically, these applets are stored as .cpl files. For example, the Add or Remove Programs applet is stored under the name appwiz.cpl in the SYSTEM32 folder. In recent versions of Windows, the Control Panel has two views, Classic View and Category View, and it is possible to switch between these through an option that appears on either the left side or top of the window. Many of the individual Control Panel applets can be accessed in other ways. For......

Words: 549 - Pages: 3

Premium Essay

Individual Case Study: Vizio and the Market for Flat-Panel Tvs

...Individual Case Study: Vizio and the Market for Flat-Panel TVs International Business: Strategy and Structure [Author] Table of Contents Introduction 3 Vizio’s Background 3 Effects of Globalization 3 Recommendations 5 Conclusion 6 Work Cited 7 Introduction The objective of this case study is to analyze the success of Vizio and discuss how globalization has affected the manufacturing of flat-panel TVs. What effects do companies that globalize their production have on their competitors and other participants in the marketplace, and what role can the government take to make the situation the best for all the stakeholders? These questions will be answered with focus on strategies that enterprises can implement to be successful and grown in the future marketplace. I have chosen this case study because I believe globalization is one of the most important factors to evaluate when you are leading a business in today’s economy. Vizio’s Background Vizio is a California based Flat-Panel TV producer. It was founded in 2002, and is most known for their affordable Flat-Panel TVs. company became the largest provider in its field in the United States with a 21.7 % market share in 2009. Anna Phillips, (2012), International Business: Strategy & Structure Effects of Globalization Globalization is defined in the textbook as “The shift toward a more integrated and interdependent world economy. Globalization has several facets, including the......

Words: 1157 - Pages: 5

Premium Essay

Swedish Match

...Zach Savidge [Ying Jiang] Hugo Ou [Gabriel La Spada] ECO 363 4/13/2014 Swedish Match Case 1. The company will save 4.5%×4,000,000,000×28%= SEK 50,400,000 annually. We assume the debt Swedish Match issues is a 10-year maturity coupon bond as the average BBB corporate bond (the CFO believes Swedish Match will receive a BBB+ rating) with the yield closest to that of Swedish Match’s debt is the 10-year maturity. Moreover, we do not assume that this debt will be refinanced into perpetuity because the financing decisions of Swedish Match are clearly dynamic - the board will only decide on the issuance of this one bond as the upcoming board meeting, not whether the fixed debt level will be maintained through refinancing once the proposed bond reaches maturity. Thus the value of the tax shield represents a 10-year annuity. Lastly, we assume the risk of the tax shield is equivalent to that of the debt because we are estimating the value of the tax shield of a fixed dollar value level of debt (as opposed to a level of debt that is a fixed percentage of Swedish Match’s enterprise value). Hence the discount rate for the annuity is the 4.5% yield to maturity of the debt. Value of Tax Shield = 2. Post-Recap, Swedish Match will have an additional SEK 4 billion in debt and have SEK 4.5 billion less in book value equity. The pre and post recap balance sheets as of 2004 are shown below. Balance Sheet | Pre-Recap | Post-Recap | | Cash & Short Term......

Words: 1834 - Pages: 8

Premium Essay

A Suitable Match

...A suitable match The Victorian age is the period of time, when Queen Victoria was reigning. It was from 1827-1901. Even though England had all of these great things in the Victorian age, the class system was still a very big part of it, unfortunately. The social classes are very different. There is a class called Lower class. A person who is a part of the lower class is not wealthy when it comes to money. They depended very much on other people. Like poor people or orphans relied on the charity of others. Then there is the working class. They were divided in two groups; skilled class and unskilled class. The middle class is a wide class. A person in the middle class, could be as rich as one in the upper-class, but because of their social status, they can only be placed in the middle class. This is called higher middle class. Lower middle class people often work for people in the higher middle class. The upper-class was the highest class. They were rich on money, and they were rich on their status and their circle of acquaintances. The play takes place in the house of Lady Bracknell. It is in the company of Lady Bracknell and a guy named Jack, we hear the play. Jack is a possible match for Lady Bracknell’s daughter, Gwendolen. The plot is over a very short amount of time, about ten minutes. Lady Bracknell is asking Jack some questions to find out if he is suitable for her daughter. Not every guy is suitable for her daughter. It is not just her daughter she is giving......

Words: 743 - Pages: 3

Premium Essay

Swedisch Match

...2: A New Financial Policy at Swedish Match Xavier Dumas (2525562), Reinout Niekrake, Wouter Maas (2525308) Swedish Match is a company that produces smokeless tobacco, cigars, matches and lighters. The company originated from a merger between J&V and Förenade in 1916. The focus of this case lies with the financial policies at Swedish Match. In the past few years, Swedish Match maintained conservative financial policies. They rapidly paid off their debts, keeping its leverage – the ratio of debt to capital – very low. By doing this, they had a credit rating of A- from rating agency S&P (see Exhibit 1 for data on ratings). In September 2005, Lars Dahlgren, CFO of Swedish Match, is considering a radical proposal. By issuing new bonds for a total of 4 billion SEK, and repurchasing shares with this money, he wants to increase the firm’s leverage. Yet Dahlgren understood that the board would raise several concerns about the proposal. In this paper, the pros and cons of this new financial policy will be addressed, based on arguments and calculations. One of the reasons Dahlgren wants to propose this new financial policy, is to reduce its annual tax payments. His expectation is that the tax savings from this transaction will boost the stock price and benefit shareholders. For a 4 billion SEK recapitalization, Swedish Match has to pay 180 million SEK interest in the next year. Since the corporate tax rate on income is 28%, Swedish Match will reduce its annual tax payments......

Words: 1413 - Pages: 6

Premium Essay

Vizio and the Market for Flat Panel Tvs

...Paper Flat panel displays encompass a growing number of electronic visual display technologies. They are far lighter and thinner than traditional television sets and video displays that use cathode ray tubes (CRTs), and are usually less than 10 centimetres (3.9 in) thick. Flat panel displays can be divided into two general display device categories: volatile and static. In many applications, specifically modern portable devices such as laptops, mobile phones, digital cameras, camcorders, point-and-shoot cameras, and pocket video cameras, any display disadvantages are made up for by portability advantages. Most of the modern flat-panel displays use LCD technologies. Most LCD screens are back-lit to make them easier to read in bright environments. They are thin and light. They provide better linearity and higher resolution. A multifunctional monitor (MFM) is a flat panel display that has additional video inputs (more than a typical LCD monitor) and is designed to be used with a variety of external video sources. In many instances, an MFM also includes a TV tuner, making it similar to a LCD TV that offers computer connectivity. ------------------------------------------------- History[edit] The first engineering proposal for a flat panel TV was by General Electric as a result of its work on radar monitors.[when?] Their publication of their findings gave all the basics of future flat panel TVs and monitors. But GE did not continue with the R&D required and never......

Words: 412 - Pages: 2

Free Essay

Microstrip Antenna

...IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, VOL. 54, NO. 12, DECEMBER 2006 3755 A New Compact Microstrip-Fed Dual-Band Coplanar Antenna for WLAN Applications Rohith K. Raj, Manoj Joseph, C. K. Aanandan, K. Vasudevan, Senior Member, IEEE, and P. Mohanan, Senior Member, IEEE Abstract—A novel compact microstrip fed dual-band coplanar antenna for wireless local area network is presented. The antenna comprises of a rectangular center strip and two lateral strips miprinted on a dielectric substrate and excited using a 50 crostrip transmission line. The antenna generates two separate resonant modes to cover 2.4/5.2/5.8 GHz WLAN bands. Lower resonant mode of the antenna has an impedance bandwidth (2:1 VSWR) of 330 MHz (2190–2520 MHz), which easily covers the required bandwidth of the 2.4 GHz WLAN, and the upper resonant mode has a bandwidth of 1.23 GHz (4849–6070 MHz), covering 5.2/5.8 GHz WLAN bands. The proposed antenna occupy an area of 217 mm2 when printed on FR4 substrate . A rigorous experimental study has been conducted to confirm the characteristics of the antenna. Design equations for the proposed antenna are also developed. ( = 4 7) Index Terms—Coplanar waveguide, dual-band antennas, printed antennas, wireless local area networks (WLANs). I. INTRODUCTION IRELESS LOCAL area networks (WLAN) are being widely recognized as a viable, cost effective and high speed data connectivity solution, enabling user mobility. The rapid developments in WLAN......

Words: 5288 - Pages: 22

Free Essay


...spellMatWkts BBI Econ (rf) 2.6 026 0 8.66 6 4 01-0-12-0 37 204/35 8.36 (sla) 3.0 0 21 0 7.00 4 0 13-0-21-0 15 144/18 6.38 Recent overs 1 1 1 1 1 1 | 6 . 4 4 6 1 | 6 1 2 . 1 1 | 1 4 1 4 1 1 Current partnership 59 runs, 4.5 overs, RR: 12.20 (Raina 17, Vijay 42) Last Bat MEK Hussey c †Ojha b Aaron 20 (22b 2x4 0x6) SR: 90.90 Fall of wicket: 68/1 (8.1 ov); Partnership: 68 runs, 8.1 overs, RR: 8.32 (Hussey 20, Vijay 47) 12.6 Russell to Raina, 1 run, Raina tries to pull from outside off but gets the toe end of the bat on the ball, which goes towards third man. The umpire signals for the time out. 12.5 Russell to Vijay, 1 run, dabbed to third man for a single 12.4 Russell to Vijay, FOUR, shot! Vijay backs away towards leg stump and drives a length ball flat over extra cover, Russell i...

Words: 297 - Pages: 2

Premium Essay


...Miniature Aerial Vehicle – Airframe characterization R. Shivkumar, Hemendra Arya & K. Sudhakar Department of Aerospace Engineering Indian Institute of Technology Bombay Powai, Mumbai – 400076 e-mail: Abstract: Airframe design is an important step in the development of mini aerial vehicles. Airframe design means the shape and size of the aircraft. Issues related to mini aerial vehicle design are discussed in the paper. In this paper a case study of design of a 0.6 m fixed wing aerial vehicle is presented. This case study also brings out the requirement of various tools to conduct such an exercise. Introduction: Significant interest is being shown by academic institutions in research activities related to Remotely Piloted Vehicles (RPV’s) and Unmanned Aerial Vehicles (UAV’s). Flying platforms and their design with suitable payloads reinforce classroom education while exposing students to a host of flight related problems and issues of systems integration. There has been a long felt need to bring students, especially in the field of engineering, closer to the complexities and risks in dealing with actual systems. The Department of Aerospace Engineering, IIT Bombay has decided to make headway in this direction by developing remotely piloted aerial vehicles as experimental platforms[1]. The various disciplines required for such a design activity are aerodynamics, performance, structures, stability, control and propulsion. Each of these designs are different......

Words: 4590 - Pages: 19